Rahimafrooz RZS 10KVA 10kW Solar IPS with 51.2V 300Ah LiFePO4 Battery

Product Overview

The RZS 10KVA 10kW Solar IPS is a high-capacity solar backup and energy-storage solution designed for applications requiring substantial backup power. It combines a 10kW output, three 51.2V 100Ah LiFePO4 battery units, high solar input capacity, MPPT charging and UPS functionality into one complete system.

With a specified maximum solar panel capacity of 6000W × 2, the system is designed to accommodate a total solar input configuration of up to 12kW, based on the supplied specifications. This makes the RZS 10KVA suitable for users looking for a higher-capacity solar IPS for residential, commercial and backup-power applications.

51.2V 300Ah LiFePO4 Battery Configuration

The RZS 10KVA uses three 51.2V 100Ah LiFePO4 battery units. Based on the supplied voltage and capacity, the combined nominal battery energy is approximately 15.36kWh.

The battery system is specified for up to 6000 cycles at 80% depth of discharge (DOD), making it suitable for regular energy-storage and backup applications.

The system uses software-based BMS protection, with the supplied specification listing 100A × 2 BMS current.

10kW Output Power

The RZS 10KVA provides a rated 10kW output power with a specified no-load output voltage of 220V and full-load output voltage of 220V ±5%.

This higher output capacity allows the system to support a larger combination of electrical loads compared with lower-capacity solar IPS models, subject to the total connected load and system operating conditions.

Up to 12kW Solar Input

The RZS 10KVA supports a maximum solar panel capacity of 6000W × 2. Based on the supplied configuration, this represents a total maximum solar capacity of approximately 12kW.

The maximum PV input voltage is specified as 500V, while the MPPT tracking range is 120–450V. The maximum charging current is listed as 100A × 2.

The supplied solar charging time is approximately 3 hours, while the mains battery charging time is approximately 3 hours 30 minutes. Actual charging performance can vary according to solar conditions, battery state of charge, connected loads and system configuration.

Fast UPS Transfer Time

The RZS 10KVA supports a transfer time of 20ms, with a faster 10ms transfer time in UPS mode according to the supplied specifications.

Fast transfer can help minimize interruptions when mains electricity fails, making the system suitable for applications where reliable backup power is important.

Built-in Wi-Fi and 5.2-Inch LCD

The system features a 5.2-inch LCD display for system information and monitoring. It also includes built-in Wi-Fi, providing convenient connectivity for supported monitoring functions.

The combination of LCD and Wi-Fi makes it easier for users to access system information without relying solely on physical inspection.

Protection Features

The RZS 10KVA includes BMS and breaker protection. Its specified overload capability is:

• 1 minute at 102%–110% load

• 10 seconds at 110%–130% load

These values define the specified temporary overload operating capability of the system.

Physical Design

The inverter measures approximately 170 × 675 × 620 mm and has a listed weight of 27 kg.

Each battery unit measures approximately 170 × 675 × 420 mm and weighs around 53.76 kg. With three battery units, the battery section requires appropriate installation space and structural consideration.

The specified operating temperature range is 0°C to 45°C, while inverter noise emission is rated at ≤50 dB. The listed protection rating is IP20, so the system should be installed in a suitable protected environment.

Applications

The RZS 10KVA Solar IPS can be considered for:

• Large home backup systems

• Office backup power

• Commercial establishments

• Shops and business premises

• Solar energy storage

• Load-shedding backup

• High-capacity residential applications

• Essential electrical loads

• Solar-assisted backup systems

• Commercial energy-storage applications

The actual number of appliances that can be operated simultaneously depends on their combined power consumption and the system's 10kW output capacity.

Why Choose RZS 10KVA Solar IPS?

The RZS 10KVA combines 10kW output power, a three-unit 51.2V 100Ah LiFePO4 battery configuration, up to 12kW solar input, MPPT charging, UPS functionality, built-in Wi-Fi and a 5.2-inch LCD.

For customers in Bangladesh looking for a 10KVA 10kW Solar IPS with LiFePO4 battery, this model provides a high-capacity platform for solar backup and energy-storage requirements.

Why Buy from MuthoBD.com?

MuthoBD.com offers solar power, batteries, inverters and electrical solutions for the Bangladesh market. Customers can compare technical specifications and choose a suitable backup system according to their required load, battery capacity and solar panel configuration.